MALAYSIAN JOURNAL OF INDUSTRIAL TECHNOLOGY

Malaysian Journal of Industrial Technology (MJIT) (ISSSN:  2462-2540), the journal by Universiti Kuala Lumpur, Malaysian Institute of Industrial Technology (UniKL MITEC). MJIT is an international and multidisciplinary journal which accepts original articles, reviews of existing knowledge, short communications, technical reports, projects results and findings which have not been previously published anywhere else. The goal of this journal is to provide a platform for scientists and academicians all over the world to promote, share, and discuss various new issue and developments in different areas of research.

Areas relevant to the scope of the journal include:

Physics, Chemistry, Biology, Mathematics, Logistic, engineering, Information and Communication Technology, Robotic, Electronics are accepted. Papers relating directly or indirectly to all aspect of these fields: applied, theoretical or experimental including Environmental and Health are welcomed.

Editor in chief:

Assoc. Prof. Dr. Sairul Izwan Safie
Universiti Kuala Lumpur
Malaysian Institute of Industrial Technology

Co-editor in chief:

Dr. Siti Nor Zawani Ahmmad
Universiti Kuala Lumpur
Malaysian Institute of Industrial Technology

Dr. Mohd Amran Mohd Daril
Universiti Kuala Lumpur
Malaysian Institute of Industrial Technology

Editorial board:

Prof. Dr. Khasan S. Karimov
Ghulam Ishaq Khan Institute of Engineering Sciences and Technology, Pakistan.

Prof. Dr. Maria Huge-Brodin
Linköping University, Sweden.

Prof. Dr. Edward Sweeney
Aston University, UK.

Prof. Dr. Suhaiza Hanim Mohamad Zailani
Universiti Malaya

Prof. Ir. Dr. Mohamed Rehan Karim
Universiti Malaya

Engr. Prof. Dr. Marizan Sulaiman
Universiti Teknikal Malaysia Melaka

Prof. Dr. Khairanum Subari
Universiti Kuala Lumpur

Assoc. Prof. Dr. Asri Ngadi
Universiti Teknologi Malaysia

Assoc. Prof. Dr. Haslenda Hashim
Universiti Teknologi Malaysia

Assoc. Prof. Dr. Adnan Hassan
Universiti Teknologi Malaysia

Assoc. Prof. Dr. Hisham Hamid
Universiti Kuala Lumpur

Assoc. Prof. Dr. Kamaruzzaman Ismail
Universiti Kuala Lumpur
Malaysia France Institute

Dr. Trevor Oliver
Aston University, UK.

Dr. Pietro Evangelista
Research Institute on Innovation and Services for Development, Italy.

Dr. Helmi Adly Mohd Noor
Universiti Kuala Lumpur
Malaysian Institute of Industrial Technology

Dr. Tan Owee Kowang
Universiti Teknologi Malaysia

Dr. Amir Putra bin Md Saad
Universiti Teknologi Malaysia

Dr. Nor Samsiah Sani
Universiti Kebangsaan Malaysia

Dr. Asrul bin Adam
Universiti Malaysia Pahang

Dr. Yasmin binti Abdul Wahab
Universiti Malaysia Pahang

Dr. Saliza Azlina Osman
Universiti Tun Hussein Onn Malaysia

Dr. Norfaradilla Wahid
Universiti Tun Hussein Onn Malaysia

Dr. Mohd Hanif bin Ismail
Universiti Tun Hussein Onn Malaysia

Dr. Muhammad Syafiq Hazwan bin Ruslan
Universiti Teknologi Petronas

Dr. Gede Pramudya Ananta
Universiti Teknikal Malaysia Melaka

Dr. Husna Osman
Universiti Kuala Lumpur
Malaysian Institute of Information Technology

Dr. Megat Farez Azril
Universiti Kuala Lumpur
Malaysian Institute of Information Technology

Dr. Siti Haryam Shaikh Ali
Universiti Kuala Lumpur
Malaysian Institute of Information Technology

Dr. Ahmad Sabry bin Mohamad
Universiti Kuala Lumpur
British Malaysian Institute

Dr. Hanim binti Mohd Yatim
Universiti Kuala Lumpur
Malaysian Institute of Industrial Technology

Dr. Mohd Ismail bin Yusof
Universiti Kuala Lumpur
Malaysian Institute of Industrial Technology

Dr. Mohd Al-Fatihhi bin Mohd Szali Januddi
Universiti Kuala Lumpur
Malaysian Institute of Industrial Technology

Dr. Kang Chia Chao
Universiti Kuala Lumpur
Malaysian Institute of Industrial Technology

Dr. Hj. Mohd Aliff Afira bin Sani
Universiti Kuala Lumpur
Malaysian Institute of Industrial Technology

Dr. Adnan Hj Bakri
Universiti Kuala Lumpur
Malaysian Institute of Industrial Technology

Mohammad Abdullah
Universiti Teknologi MARA

Azrina Arshad
Universiti Kuala Lumpur
Malaysian Institute of Information Technology

Nurul Huda Arifin
Universiti Kuala Lumpur
Malaysian Institute of Information Technology

Fatin Ayuni binti Mohd Suhaimi
Universiti Kuala Lumpur
Malaysian Institute of Industrial Technology

Allina binti Abdullah
Universiti Kuala Lumpur
Malaysian Institute of Industrial Technology

Rahimah Kassim
Universiti Kuala Lumpur
Malaysian Institute of Industrial Technology

ETHICS STATEMENT

MJIT is committed to ensuring the highest standards of publication ethics whereas the publication malpractice is strictly prohibited by all possible measure. Our responsibility is to publish original work of value to the intellectual community in the best possible form and to the highest possible standards. A guideline on MJIT code of ethics largely based upon the principles upheld by the Committee on Publication Ethics (COPE).  It covers the code of ethics for chief editor, editorial board members, reviewers and authors.

EDITOR’S RESPONSIBILITIES

  • The Editors are responsible for deciding which of the articles submitted to the journal should be published;
  • The Editors may discuss with other editors or reviewers in making decision;
  • The Editors evaluate manuscripts for their intellectual content without regard to race, gender, sexual orientation, religious belief, ethnic origin, citizenship, or political philosophy of the authors;
  • The Editors must not disclose any information about a submitted manuscript to anyone other than the corresponding author, reviewers, potential reviewers, other editorial advisers, and the publisher, as appropriate;
  • The Editors should ensure a fair and appropriate peer review process;
  • Unpublished materials disclosed in a submitted manuscript must not be used by anyone who has a view of the manuscript in his or her own research without the express written consent of the author;
  • The Editors should guard the integrity of the published record by issuing corrections and retractions when needed and pursuing suspected or alleged research and publication misconduct.

EDITORIAL BOARD RESPONSIBILITIES

  • The Editorial Board must keep information pertaining to submitted manuscripts confidential.
  • The Editorial Board must disclose any conflicts of interest.
  • The Editorial Board must evaluate manuscripts only for their intellectual content.
  • The Editorial Board is responsible for making publication decisions for submitted manuscripts.

REVIEWER’S RESPONSIBILITIES

  • Information regarding manuscripts submitted by authors should be kept confidential and be treated as privileged information;
  • Reviews should be conducted objectively. There shall be no personal criticism of the author. Reviewers should express their views clearly with supporting arguments;
  • Reviewers should identify relevant published work that has not been cited by the authors. Any statement that had been previously reported elsewhere should be accompanied by the relevant citation;
  • Reviewers should request to the Editors attention any substantial similarity or overlap between the manuscript under consideration and any other published paper of which they have personal knowledge;
  • In case, any reviewer feels that it is not possible for him/her to complete review of manuscript within stipulated time then the same must be communicated to the editors, so that the same could be sent to any other reviewer;
  • Reviewers should not review manuscripts in which they have conflicts of interest resulting from competitive, collaborative, or other relationships or connections with any of the authors, companies, or institutions connected to the papers.

AUTHOR’S RESPONSIBILITIES

  • The Authors should submit papers only on work that has been conducted in an ethical and responsible manner and that complies with all relevant legislation;
  • The Authors present their results clearly,  honestly, and   without   fabrication, falsification or inappropriate data manipulation;
  • The Authors should endeavor to describe their methods clearly and unambiguously so that their findings can be confirmed by others;
  • The Authors should adhere to publication requirements that submitted work is original, is not plagiarized, and has not been published elsewhere;
  • The Authors must certify that the manuscript is not currently being considered for publication elsewhere;
  • The Authors should ensure that they have written entirely original works, and if the authors have used the work and/or words of others this must be appropriately cited;
  • The Authors should take collective responsibility for submitted and published work;
  • A paper should contain sufficient detail and references to permit others to replicate the work. Duplicitous or expressively inaccurate statements constitute unethical behaviour and are unacceptable;
  • Proper acknowledgment of the work of others must always be given. Authors should cite publications that have been influential in determining the nature of the reported work;
  • The Authors should ensure that the authorship accurately reflects individuals’ contributions to the work and its reporting; and where there are others who have participated in certain substantive aspects of the research project, they should be acknowledged;
  • The Authors should disclose relevant funding sources and any existing or potential conflicts of interest. All sources of financial support for the project should be disclosed;
  • When an author discovers a significant error or inaccuracy in his/her own published work, it is the author’s obligation to promptly notify the journal editors and the editor to retract or correct the paper.

TRANSFER OF COPYRIGHT

MJIT accepts manuscripts that have not been published elsewhere and are not under consideration for publication by other print or electronic media. The authors agree to transfer the copyright to MJIT editorial office.

TOTAL PRODUCTIVE MAINTENANCE: ISSUES AND DIRECTION FOR FUTURE RESEARCH
Adnan Hj. Bakri, Widya Kartini Mohd. Razali, Mohd. Zul-Waqar Mohd. Tohid, Shaiful Anwar Ismail
Page 6-11


ANALYSIS OF LIGHTNING TRANSIENT EFFECT ON A TRANSFORMER SUBSTATION
Nur Fazira Haris, Nur Hazasha Shamsudin, Ab Halim Abu Bakar
Page 12-17


A DEVELOPMENT OF ANTERIOR CRUCIATE LIGAMENT (ACL) DIAGNOSIS SYSTEM USING FUZZY INFERENCE SYSTEM
S.Syafiq Mazlan, M.I Yusof, S. Siti Hafshar
Page 18-24


REVIEW ON CONVECTION HEAT TRANSFER USING POROUS MEDIA
Rahimah Mahat, Wan Najat Wan Azman, Azzafeerah Mahyuddin, Rahimah Kassim
Page 25-30


RESPONSE SURFACE METHODOLOGY (RSM) APPLICATION FOR OPTIMIZATION OF PHYTOREMEDIATION PROCESS USING PASPALUM SROBICULATUM L.HACK
Salmi Nur Ain Sanusi, Wan Hasnidah Wan Osman, Siti Rozaimah Sheikh Abdullah, Firdaus Mohamad Hamzah
Page 31-37


THE ORGANIZATIONAL CRITICAL SUCCESS FACTOR OF CLOUD COMPETING IMPLEMENTATION
Rahimah Kassim, Latipah Nordin, Rahimah Mahat, Wan Najat Wan Azman
Page 38-55


OIL REMOVAL USING DURIAN PEEL WASTES: EFFECT OF ADSORBENT CONDITION
Abdullah M., Muhammad Faez Mohd Kamaruzzaman, Amirul Afif Zulkifli, Nur Hamiza Md Kamis, Nur Amirah Mohd Shahar
Page 56-61


THE APPLICATION OF FUNGUS, P.OSTREATUS IN THE REMOVAL OF DANGEROUS SUBSTANCES
Arbanah Muhammad, Mohd Zakir Sukor
Page 62-70


 

DECOMPOSITION OF NON-WOODY FIBRE FROM NAPIER GRASS BY INDIGENOUS ISOLATE POTENTIAL FOR BIOPULPING PROCESS
Zainatul ‘Asyiqin Samsu, Mohammad Syarifuddin Abd Karim
Page 1-4


CONCURRENT VALIDITY OF CHEST WALL EXPANSION BETWEEN CLOTH TAPE MEASURE, ELECTROMAGNETIC AND LASER DISPLACEMENT SENSORS
Nor Najwatul Akmal Ab. Rahman, Kok Beng Gan, Zi Jian Sia, Zainura Abdul Karim, Devinder Kaur Ajit Singh
Page 5-11


THE MODERATING EFFECT OF TECHNOLOGY ACCEPTANCE PERSPECTIVES ON THE FORMATION OF E-SQ AND SERVICES SATISFACTION IN LOW COST CARRIER AIRLINE
Muhammad Khariri Majid, Norhani Bakri, Nur Shazwani Laila Junaidi, Rahmat Roslan Buang
Page 12-17


THE BUSINESS DEVELOPMENT PLAN REPORT FOR PENGERANG INDUSTRIAL AREA: THE FINANCIAL SUPPORT ASPECT
R.Yusof, J. Jaafar, M. Zahid, M.N. Alias, K.F. Adrutdin, S. Hassan, Z.M. Naisr, M.G. Abd Aziz, S. A. Md. Yasin
Page 18-23


IMPACTS OF SERVICE LEARNING ON ACHIEVING LEARNING OUTCOMES IN A PRE-UNIVERSITY COURSE
R.T. Rodrigo, W. C. Tan
Page 24-31


HIGHER LEARNING INSTITUTION: ROLES IN GENERATING HIGHLY POTENTIAL TECHNOLOGY WORKERS FOR THE INDUSTRY
A.M. Bardai
Page 32-38


RELATIONSHIP BETWEEN BURNOUT AND PHYSICAL, PSYCHOLOGICAL AND COGNITIVE WELL-BEING AMONG NURSES
Rabiatul Adawiyah Ahmad, Norhani Bakri, Farah Fadzlia Jalaludin, Muhammad Khairi Abdul Majid
Page 38-45


 

DEVELOPMENT AND CONTROL DESIGN FOR LINEAR ACTUATED FINGER
Ellyana Shaira Abd Aziz, Muhammad Nizam Kamarudin, Mohd Hafiz Jali
Page 1-6


QUASI-STEADY STATE SOLUTION OF LITHIUM ION CONCENTRATION OF HALF-CELL CATHODE IN DILUTE ELECTROLYTE
Rahifa Ranom, Norzihani Yusof, Irma Wani Jamaludin, Nur Rafiqah Abdul Razif
Page 7-12


IDENTIFICATION OF FACTORS AFFECTING COST OVERRUN IN THE CONSTRUCTION OF INDUSTRIAL BUILDINGS
Davied Insja, Lukas. B. Sihombing
Page 13-19


SMELL INDEX FOR INDOOR AIR QUALITY SYSTEM BASED ON MULTILAYER PERCEPTION (MLP)
S.M. Saad, A. Y. M. Shakaff, M. Hussein, M. Mohamad, M. A. M. Dzahir, Z. Ahmad
Page 20-24


PRELIMINARY STUDY OF RESPONSE SURFACE METHODOLOGY FOR OPTIMIZATION OF OIL REMOVAL BY ADSORBENT-BASED PINEAPPLE PEEL WASTE
Abdullah M., Roger S. L, Michael D. D.
Page 25-29


SERVICE QUALITY ANALYSIS IN INDONESIAN HIGHWAYS
A.D. Rarasati, J. Sumabrata, M. I. Hafidz, H. T. Zuna
Page 30-37


METHODS FOR COLLECTING SPIRITUAL EXPERIENCES DATA AMONG OLDER ADULTS: DIARY-INTERVIEW STUDY
Nahdatul Akma Ahmad, Azaliza Zainal, Fariza Hanis Abd Razak, Wan Adilah Wan Adnan
Page 38-45


RECOGNITION OF HANDWRITTEN ARABIC DIGITS IN WORST-CASE SCENARIOS
R. F. Raja Suleiman, N. Md Said
Page 46-50


OVERVIEW OF WEB TECHNOLOGY USED, WEB CONTENT AMOUNT AND WEBSITE POPULARITY IN SELECTED GOVERNMENT WEBSITES
F. D. S. Bahry, M. Masrom, M. N. Masrek, N. Amran, Y. Kamis
Page 51-60


RECONSTRUCTION OF SMOOTH SURFACE BY USING CUBIC BEZIER TRIANGULAR PATCH IN GUI
Noorehan Awang, Rahmita Wirza Rahmat
Page 61-69


THE ADOPTION OF E-GOVERNMENT: CHEAP SALE NOTICE SYSTEM AMONG SMES IN MALAYSIA (CONCEPTUAL PAPER)
S. Nursyairalla, H. Musa
Page 70-76


PROBLEM BASED LEARNING: USING PBL IN SCHOOL BASED ORAL ASSESSMENT
A. R. Arbaiah
Page 77-81


DEVELOPERS’ PERSPECTIVES ON MOOC SUSTAINABILITY IN UNIVERSITI TEKNOLOGI MALAYSIA
N. F. Sa’adon, R. A. Alias, H. Nakanishi, N. A. Atan
Page 82-89


INDONESIAN PORT GOVERNANCE
Sunaryo, A. D. Rachmawati
Page 90-95


KNOWLEDGE REPRESENTATION ON STUDENT’S ACADEMIC PERFORMANCE USING RULES BASED METHOD
Ismail. Sarerusaenye, Ismail. Shahrinaz
Page 96-102


 

MUSHROOM GROWING MONITORING DEVICE (MUSMOD)
 Diyana Ab Kadir1,a, Shahfiqual Aqwa Md Mahmood,Adidah Lajis, Sri Banu Munisamy,
Shahidatul Arfah Baharudin, Nadilah Mohd Ralim.

Page 1-6


QUASI-STEADY STATE SOLUTION OF LITHIUM ION CONCENTRATION OF HALF-CELL CATHODE IN DILUTE ELECTROLYTE
Rahifa Ranom, Norzihani Yusof, Irma Wani Jamaludin, Nur Rafiqah Abdul Razif
Page 1-6


BLIND STICK NAVIGATOR
Sri Banu Munisamy, Diyana Ab Kadir2, Mohammad Hazmi Elias, Shahidatul Arfah Baharuddin, Adidah Lajis5,
Page 7-11


ELECTROLESS DEPOSITION OF NANOSCALE TIN OXIDE ON COCONUT ACTIVATED CARNON FOR SUPERCAPACITOR ELECTRODE
S. Faraji, A. M. Abioye, F. N. Ani3
Page 12-16


THE TRIBOLOGICAL CHARACTERISTICS OF RUBBER SEED OIL WITH MINERAL OIL BLENDS
F. N. Abdul Fattah, M. A. Mohd Ariff,
J. Mohammed Hassan, A. Farid Nasir

Page 17-22


 HMM BASED BIOMETRIC SYSTEM USING CARDIAC SIGNALS
Hadri Hussain, Chee-Ming Ting, M.Nasir Ibrahim,
Fuad Numan, Siti Hussain, Norzaliza Md Nor,
Alias Mohd Noor.

Page 31-35


 UTILIZATION OF GLASS WASTE AS FINE AGGREGATE IN CONSTRUCTION MATERIALS
Philip Chie Hui Ling, Ee Ling Yong, Cher Siang Tan.
Page 36-42


DEVELOPMENT OF THE ERGONOMIC NECK POSTURE LEVEL BY USING ELECTROMYOGRAPHY METHOD
H. Soewardi, N. Setiawan, J. Sidhatama
Page 43-47


A SUSTAINABLE APPROACH OF THERMOPLASTIC FILMS FROM TACCA LEONTOPETALOIDES STARCH REINFORCED WITH BIOCHAR RICE HUSK
 A. M. Mohd Amin,  S. Mohd Sauid, M. Musa,
K. H. Ku Hamid

Page 48-56


 RISK ANALYZE  MANAGEMENT WATER QUALITY CISADANE RIVER BY PROJECT APPROACH
 Idi Namara, Djoko M Hartono, Ayomi Dita Rarasati, Fadhila Muhammad LT
Page 57-61


 ERGONOMIC DESIGN OF THE CORN SHELLER MACHINE FOR IMPROVING PRODUCTIVITY USING AXIOMATIC DESIGN
S. Nursyairalla, H. Musa
Page 70-76


 ANALYSIS OF FEATURE SELECTION WITH K-NEAREST NEIGHBOUR (KNN) TO CLASSIFY INDOOR AIR POLLUTANTS
S. M. Saad, A. Y. M. Shakaff, M. Hussein,
M. Mohamad, M. A. M. Dzahir and Z. Ahmad

Page 75-80


PROJECT FINANCE AND RISK MODELING USING A SYSTEM DYNAMICS APPROACH A TOLL ROAD PROJECT
 Lukas B. Sihombing
Page 86-93

 

 A STUDY OF STEM AMONG RURAL STUDENTS
Siti Nurul ‘Ain Hj Zaiton, Haryana Mohd Hairi, Nurhuda Ismail, Mohammad Bin Abdullah, Nurin Amilin Othman, Nursyazni Syahirah Kamal Baharin, Nor syahirah Irwan,Nuraina Badrulhisam, Noor Irdina Mohamad Sopian
Page 1-7


 SLOPE STABILITY ANALYSIS USING SLOPEEX PROGRAM IN COMPARISON WITH COMMERCIAL SOFTWARE
S.N.A Mohd Noor, B. Baharom, D.C. Lat, R. Razali and N.S.A. Rahman
Page 8-13


THE INTEGRATION OF ISLAMIC CONCEPT OF KNOWLEDGE (EPISTEMOLOGY) IN SCIENCE, TECHNOLOGY, ENGINEERING AND MATHEMATICS (STEM) COURSES: WHY AND HOW?
 M. M. Zabidi, A. Mohamad and S.I.S. Jamaludin
Page 14-19


 A PRELIMINARY STUDY OF NUMERICAL SOLUTIONS FOR FULLY FUZZY LINEAR SYSTEM
  A. K. Khalid,  Z. S. Othman
Page 20-26


THE REMOVAL OF METHYLENE BLUE USING BANANA STEM SUGARCANE BAGASSE HYBRID ADSORBENT AND ITS KINETIC STUDY
  N. U. Ahmad, M. Z. N. Sazman,N. A. Khalid1c, M. S. M. Shuhaimi
Page 27-34


PRODUCTION OF PARTICLE BOARD FROM RICE HUSKS
 N. F. Mohamad, A.R. Hidayu1, S.I.S. Jamaludin,

Page  35 - 41


 PERFORMANCE OF INSULATION TESTING FOR POWER TRANSFORMER BY USING MIXTURE OF REFINED BLEACHED DEODORIZED (RBD) CORN AND MINERAL OIL
  Muhammad Muzamil bin Mustam ,Wan Suhaifiza binti W.Ibrahim, Mohammad bin Abdullah, Fatin Farhana3,d and Zatul Iffah binti Abd Latiff
Page 42-47


 STUDY THE COP AND THE EFFECT OF AIR FLOW FOR PILOT PLANT AIR REFRIGERATION UNIT
 Mohd Zaki Sukora, Azizul Hakim Sabrib, Nadira Shazana Abdul Isamc, Omar Syah Jehan Elham
Page 48-52


A SUSTAINABLE APPROACH OF THERMOPLASTIC FILMS FROM TACCA LEONTOPETALOIDES STARCH REINFORCED WITH BIOCHAR RICE HUSK
 A. M. Mohd Amin,  S. Mohd Sauid, M. Musa,
K. H. Ku Hamid

Page 48-56


 OVERCOMING SALINE INTRUSION IN WATER SUPPLY AT MUAR, JOHOR
   Ir. Rozaidi Amat, Mohd Reza Shamri Mansor,
Norizan Kailan,Musthaza Mohammad.

Page 53-58


 A PROPOSED CONCEPTUAL DERIVATIVE TECHNIQUE BY USING INTERACTIVE APPLICATION GAMES
 Ainon Syazana Ab Hamid1,Izni Syamsina Saari,,Samsiah Abdul Razak,and Aslina Omar
Page 59-62


PERFORMANCE COMPARISON OF BETWEEN CITRUS AURANTIFOLIA(LIME) SEED MOMORDICA CHARANTIA (BITTER MELON) IN REDUCING BLOOD GLUCOSE
 Awang Harun Al-Rashid Bin Hamzah*, Mohamad Azizul Bin Mohamad Azmi, Muhamad Alim Adha bin Makhtar, Nurul Najihah binti Fadzin, Noor Izzah Nadhirah binti Muhamad Zahidi, Ahmad Rozaimee Bin Mustafa , Roslina Raml
Page 63-68


QUANTIFICATION OF DIAPHRAGM AND INTERCOSTAL MUSCLE THICKNESS AMONG OLDER ADULTS USING ULTRASOUND IMAGING. A RELIABILITY STUDY
 N.N.A.A. Rahman,*D.K.A. Singh,N. M. Sharif, R. Sridharan and R. Lee
Page 69-74

 


 CHARACTERIZATION OF WASTE POND SILT AS AN ALTERNATIVE FOR PLANTING MEDIA

 S. H. A. Muhamad1, a, N. B. Alias1,b and R. A. H. Azhar1,c
Page 75-80

OPTIMAL PI TUNING RULES FOR LIQUID FLOW PROCESS CONTROL SYSTEM USING COHEN-COON’S (C-C), ZIEGLER-NICHOLS’S (Z-N) AND TAKAHASHI’S TUNING METHOD
  Nurul Hazwani Sabri , Noor Hidayu Abdul Rani , Arbanah Muhammad , Mohamad Iqbal Kamarulzaman

Page 1-6


 PRELIMINARY STUDY OF CHEMICALLY MODIFIED PARKIA SPECIOSA AS AN ADSORBENT FOR OIL TREATMENT
 N.Q. Othmah, M. Abdullah, A. Muhammad,A.M.M. Ismail , M.M Mustam

Page 7-11


EFFECT ON QUARTER RESULTS ANNOUNCEMENT TOWARDS STOCK PRICE: EMPIRICAL EVIDENCE FROM INDUSTRIAL PRODUCT SECTOR 
 S.Syamsyul, M.N.N. Shafika

Page 12-16


PRODUCTION OF BIODIESEL FROM GREEN ALGAE SPECIES BY TRANSESTERIFICATION PROCESS  
  Ahmad Rozaimee Bin Mustaffa, Roslina Ramli, Nur Farahana Binti Hizamnuddin, Wan Nor Fadilah Binti Wan Mat Tahir, Fatin Natasha Binti Nazri, Muhammad Adiwirawan Bin Suhndi Al-Azhar,Muhammad Mukhlis Bin Ishak,Mohammad Abdullah

Page 17-20


DIRECT TRANSESTERIFICATION WITHOUT CATALYST OF MICROALGAE WITH AN AIDED OF ULTRASONIC TREATMENT IN BIODIESEL PRODUCTION
 Ahmad Rozaimee Mustaffa, Ku Halim Ku Hamid, Mohibah Musa2, Roslina Ramli, Mohammad Abdullah

Page 21-26


 

brown-man-icon

 PUBLICATIONS

1.

 

ACADEMIC QUALIFICATION

1.

 

 PUBLICATIONS

1.

 

 RESEARCH

1.

 

 BIOGRAPHY

1.

 

Name:
Ahmad Romainor
Position:
Lecturer
Department/Section:
Official Email:
Second Email:
Office No.:
Ext. No.:
H/P:
Fax No.:
Gender:
Nationality:
Date Of Birth:
Place Of Birth:
Material Status:
Website: Address:
Research Gate:
Linkedin:
Google Scholar:
Education / Academic Qualification:
Employment (Working Experience):
Expertise (Research Area):
Research Projects/Grants:
Supervision: Languages:
Teaching And Learning:

  • Lorem ipsum dolor sit amet
  • Lorem ipsum dolor sit amet

Selected Publications:

  • Lorem ipsum dolor sit amet
  • Lorem ipsum dolor sit amet

Awards And Recognitions:

  • Lorem ipsum dolor sit amet
  • Lorem ipsum dolor sit amet

Professional Services And Professional Membership:

  • Lorem ipsum dolor sit amet
  • Lorem ipsum dolor sit amet

Consultance And Comercialization:

  • Lorem ipsum dolor sit amet
  • Lorem ipsum dolor sit amet

Courses, Workshops And Trainings Attended:
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.

TOP